CLARK · Pumps and drainage
CLARK Hippo 2 clean-water submersible pump
CLARK Hippo 2 is a lightweight clean-water submersible pump from a UK brand, with a 250W motor, maximum flow of 85 litres/minute and 6-metre head. Suitable for draining clean water from tanks, fish ponds, rooftops and floors.
The tough polypropylene pump body will not rust and includes overheating and current overload protection. Removing the bottom filter pad allows pumping down to about 3.2 mm above floor level.
Includes three hose connectors for 1/2-inch, 3/4-inch and 1-inch hoses, plus a 10 m waterproof cable. Available in 110V and 220V versions. This model has no float switch and requires manual switching; for automatic start/stop, consider Walrus PW100AC or Simer 6S.
Pumps and drainage
CLARK
Model CLARK Hippo 2
Product highlights
- Maximum flow 85 L/min, head 6 m
- Pumps down to approximately 3.2 mm above floor level
- Polypropylene pump body, rust-free
- Includes 1/2, 3/4 and 1-inch hose connectors and a 10 m waterproof cable
Specifications and information
- BrandCLARK
- Product numberSS-0005
- CategoryPumps and drainage
- ModelCLARK Hippo 2
- Maximum flow rate85 L/min
- Maximum head6 metres
- Power250 W
- Voltage110V or 220V
- Discharge outlet1 inch (includes 1/2, 3/4 and 1-inch connectors)
- Minimum pumping levelApprox. 3.2 mm
- Pump bodyPolypropylene, rust-free
- Float switchNone (non-automatic)
- Cable10-metre waterproof cable
- Suitable forClean water
